Consumer Information: MTF SCAN & Dashboard Consumer Information – Buying and selling Methods – 17 February 2026

2. Set up & Including to Chart

Step 1: Connect the indicator to a chart

1. Open MetaTrader 5
2. Open any chart (e.g., XAUUSD, H1)
3. Go to Insert → Indicators → Customized → choose the indicator identify (e.g.,  MirageTradingSystem )
4. Or drag and drop from the Navigator window (Ctrl+N) onto the chart

Step 2: Open the Inputs window

Whenever you connect the indicator, the settings window opens mechanically. You will notice enter teams organized by part:

• === MTF SCANNER ===  — Allow/disable and configure multi-symbol scanning
• === MTF SCANNER DASHBOARD ===  — Dashboard place and measurement
• === MTF SCANNER ALERTS ===  — Alert settings
• === MTF SCANNER NOTIFY TYPES ===  — Notification varieties
• === MTF TIMEFRAMES ===  — Choose timeframes to scan

Tip: If the indicator is already on the chart, right-click the chart → Indicators Listing → choose the indicator → Properties to reopen the Inputs window.

Step 3: Allow Enable DLL imports (if wanted)

Go to the Frequent tab → verify ✅ Enable DLL imports (some notification options require this permission).

Step 4: Click on OK

The indicator will begin scanning. The primary time could take 5-15 seconds to load historic information for all symbols.

3. Enter Information — MTF Scanner

Group  === MTF SCANNER ===  within the Inputs window:

4. Enter Information — MTF Scanner Dashboard

Group  === MTF SCANNER DASHBOARD ===  within the Inputs window:

5. Enter Information — MTF Alerts & Notify

Group  === MTF SCANNER ALERTS ===

Group  === MTF SCANNER NOTIFY TYPES ===

Every occasion sort under could be enabled/disabled independently:

6. Enter Information — MTF Timeframes

Group  === MTF TIMEFRAMES ===  allows you to select which timeframes to scan:

Vital notes:

• W1 is disabled by default as a result of weekly alerts are uncommon and scanning them is resource-intensive.
• Disable smaller TFs (M1, M5) in case you commerce swing/place (H1+) to considerably scale back load.
• Disable bigger TFs (D1, W1) in case you scalp (M1-M15) to cut back sign “noise.”
• The Dashboard will mechanically conceal columns for disabled TFs.

7. Methods to Use MTF Scan

7.1. How does scanning work?

After attaching the indicator and enabling the MTF Scanner:

1. Startup (5-15 seconds): Masses historic information for all symbols × timeframes
2. Historic scan: Finds patterns that appeared in the latest N bars (per  Look Again Bars )
3. Actual-time scan: Every time a brand new bar closes, checks for brand spanking new alerts
4. Show: Outcomes seem on the Dashboard + alerts fireplace if enabled

7.2. Indicators displayed on chart

When a sign is detected, you will note on the chart:

Arrows:

• ▲ Inexperienced = BUY sign
• ▼ Pink = SELL sign
• Arrows seem on the worth and time the place the sample was detected

Horizontal traces (Buying and selling Traces):

• Blue = Entry (entry degree)
• Pink = Cease Loss
• Inexperienced / Yellow / Orange / Purple = TP1 / TP2 / TP3 / TP4 (take revenue ranges)

Value labels:

• Present actual worth and pip distance at every degree

Monitoring path:

• Dotted line connecting Entry to TP/SL ranges as worth strikes
• Helps you visualize the worth “journey” after the sign seems

High quality Rating:

• A quantity from 0.0 to 1.0 displayed on the arrow
• Nearer to 1.0 = stronger, extra dependable sample

7.3. Sign states

Every sign goes by these states:

7.4. Sign filters

The indicator applies 7 filters mechanically so as:

1. Spacing — Filters alerts too shut collectively (prevents clustering)
2. High quality — Filters low-quality patterns (under Min High quality threshold)
3. Excessive Zone — Filters alerts in overbought/oversold zones
4. Path — Filters by course (BUY solely, SELL solely, or each)
5. Stoploss Hunt — Filters alerts close to stoploss hunt zones
6. Sign Zone — Filters by market construction zone (BOS/CHOCH)
7. Reverse — Filters reverse alerts when an lively sign already exists

These filters use settings from different enter teams (High quality Filter, Path Filter, and so on.). The indicator mechanically syncs between the present chart and multi-symbol scan outcomes.

8. Methods to Use the MTF Dashboard

8.1. Dashboard format

The MTF Dashboard shows as a grid on the chart:

• Rows: One row per image
• Columns: One column per timeframe (left to proper: M1 → W1)
• Empty cell: No sign
• Cell with BUY (inexperienced background): Purchase sign
• Cell with SELL (pink background): Promote sign

8.2. Data in every sign cell

When a cell accommodates a sign, you will note:

• BUY or SELL — commerce course
• Q:75% — sample high quality rating (e.g., 75% = good high quality)

8.3. Click on to leap to chart

Most necessary characteristic: Click on any sign cell on the Dashboard → the chart will mechanically:

1. Swap to that image
2. Swap to that timeframe
3. Show the sign with full Entry, SL, TP traces on the chart

Instance: Click on the “BUY” cell within the EURUSD row, H4 column → chart switches to EURUSD H4 and reveals the sign.

• The Dashboard reveals a most of 10 symbols without delay
• If greater than 10 symbols have alerts, use the Prev / Subsequent buttons to navigate pages
• Symbols with out alerts are usually not displayed (saves house)

8.5. Drag & Reduce

• Drag: Maintain the Dashboard title bar and drag to your most popular place
• Reduce: Click on the ( − ) button on the Dashboard nook to attenuate/increase
• Place saved: When switching timeframes or restarting, the Dashboard retains its place + decrease state

8.6. Colour coding

9. Sign Dashboard (Commerce Statistics Panel)

Along with the MTF Dashboard (multi-symbol grid), the indicator additionally has a Sign Dashboard — a smaller statistics panel exhibiting commerce outcomes for the present chart.

Enter group  === SIGNAL DASHBOARD ===

What it shows

The Sign Dashboard reveals:

• Whole alerts on the present chart
• BUY sign depend (Bullish) — in inexperienced
• SELL sign depend (Bearish) — in pink
• States: Pending / Lively / Completed with respective counts
• TP outcomes: Win/Loss for every TP1-4 + TSL degree, win price, whole revenue/loss pips

The Sign Dashboard solely counts alerts on the present chart (1 image + 1 timeframe). The MTF Dashboard is the multi-symbol grid.

10. FAQ & Frequent Points

Q: Dashboard not seen on chart?

Verify:

1. Enter  Present Scanner Outcomes Panel  = true
2. Enter  Allow Multi-Image Scanner  = true
3. The Dashboard could also be minimized — search for a small title bar on the chart and click on to increase
4. The Dashboard could have been dragged off-screen — reset  Panel X Place  = 380 and  Panel Y Place  = 100

Q: Dashboard reveals however no alerts?

Attainable causes:

1. Knowledge nonetheless loading — Wait 10-30 seconds after attaching the indicator. Verify the Skilled tab (Ctrl+Shift+E) to observe loading progress.
2. Filters too strict — Strive decreasing  Min High quality  (within the High quality Filter group). For instance: from 0.6 all the way down to 0.4.
3. Few symbols in Market Watch — Add extra symbols to Market Watch (Ctrl+M → right-click → Present All).
4. No patterns exist — The market merely has no alerts assembly the standards proper now. That is regular.

Q: Dashboard solely reveals alerts for the present timeframe, not different TFs?

Trigger: Knowledge for different timeframes hasn’t been downloaded by MT5 but.

Answer:

1. Wait an extra 10-30 seconds — the indicator mechanically retries loading information
2. Manually open charts on a couple of different TFs (e.g., open EURUSD H1, H4) so MT5 downloads the information
3. Verify the Skilled log — in case you see “unverified alerts,” the indicator is retrying

Q: Sign on Dashboard however clicking does not change chart?

Verify:

1. Be sure that no different window is overlapping the Dashboard
2. Click on precisely on the cell with BUY/SELL textual content (not an empty cell)
3. The image have to be in your Market Watch for the change to work

Q: Too many alerts firing consistently?

Answer:

1. Improve  Alert Cooldown  to 60-120 seconds
2. Disable notify varieties you do not want (e.g., preserve solely  Notify: Entry Value Hit )
3. Disable smaller TFs (M1, M5) in case you do not scalp — smaller TFs generate extra alerts

Q: MT5 operating sluggish / lag after enabling MTF Scanner?

Answer:

1. Lower  Batch Dimension  to 20-30
2. Disable unneeded TFs (e.g., disable M1, M5, W1)
3. Cut back symbols in Market Watch (preserve 20-30 key symbols)
4. Lower  Historical past Depth per Image  to 15-20
5. If nonetheless sluggish, allow  Solely Scan Present Image  to scan just one image

Q: Indicators seem then disappear?

That is regular habits in these instances:

1. Sign expired: Value did not attain Entry throughout the designated time interval
2. Filtered by Reverse Sign: A stronger reverse sign appeared → outdated sign is hidden
3. Filtered by High quality: In case you elevated Min High quality, weaker alerts get filtered out

Q: After switching timeframes, Dashboard goes clean then reappears?

That is regular habits. When switching timeframes:

1. The indicator should reload information for the brand new TF
2. The Dashboard shall be clean for 2-5 seconds
3. Indicators step by step reappear
4. Dashboard place and decrease state are preserved

Q: Indicators on present chart differ from MTF Dashboard?

That is by design:

• Present chart reveals alerts for 1 image + 1 TF
• MTF Dashboard reveals alerts from ALL scanned symbols + TFs
• The 2 sources could differ as a result of every applies filters in its personal context

Q: Numbers on Sign Dashboard and MTF Dashboard do not match?

That is regular:

• Sign Dashboard counts all alerts on the present chart (together with historic)
• MTF Dashboard solely reveals lively alerts (Pending or Lively)
• The 2 panels depend from totally different information sources and standards

Fast Reference